Woof Wear Club Reflective Brushing Boot: Medium
Woof Wear Club Reflective Brushing Boot
Based on the popular Club Range, this boot is manufactured with high visibility 3M Straps to ensure safety and visibility during road work.
5.5 mm PX closed cell neoprene
Light and flexible even when wet – does not retain water
Hard wearing strike pad with added padding
Recessed stitching for longer life
3M reflective Straps
Sold in pairs
3M Scotchlite™ materials use retro reflection technology which occurs when light rays are returned in the direction of the original light source such as a car's headlights. Hence it enhances the visibility of horses and riders in dark conditions.
1. Make sure that the horses leg is clean and dry and that the hair has been smoothed down.
2. Place the padded part of the boot to the inside of the leg.
3. Fasten the middle strap first and then the other straps ensuring even tension on all straps. The boot should sit snugly around the leg with out being too tight or too loose.
4. In order to check that the boots won't interfere with the horse when it moves, flex the horses leg and check that no skin or fur is being pinched or pulled on the flexed side of the joint. When you are happy that the boot is allowing the joint to flex check that the bottom strap is sitting above the fetlock. You are aiming to give the horse as much coverage without interfering with the joints.